1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Sealing »
4. Is_it_safe_to_get_my_stone_tiles_cleaned

Frequently Asked Questions

Other FAQs :

• Q: How can I assess whether my stone surface has been adequately sealed?
• A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.
• Q: Which specific products are utilized in the provided services?
• A: In our services, Tile Cleaners® exclusively employs high-quality cleaners and sealers sourced from reputable industry suppliers. These products are carefully chosen to ensure their suitability and effectiveness for the specific task at hand. We prioritize using premium products to deliver optimal results in our cleaning and sealing services.
• Q: What type of guarantee is provided with stone sealing services?
• A: Stone and grout sealing services do not typically come with guarantees. However, our Impregnating Water Based Sealers have a life expectancy of up to 10 years, which can vary based on factors such as the quality of the stone, level of foot traffic, and maintenance procedures implemented. It is important to understand that a sealer does not provide complete imperviousness to stains. Rather, it offers a reaction time to address spills. An unsealed floor can immediately stain, whereas a sealed floor is resistant to staining and provides a reaction time of up to 4-5 hours. A penetrating sealer sits just beneath the stone's surface, preventing spills from penetrating and causing staining. However, it cannot prevent etching or surface damage caused by acid-based spills like red wine, vinegar, urine, or fruit juice. Immediate cleaning of such spills is crucial to prevent permanent damage to the stone surface.
• Q: What are the reasons for sealing a stone surface and when is the ideal time to do so?
• A: Sealing a stone surface is crucial to prevent immediate staining from spills and to protect against permanent damage. While sealing provides effective protection, it is important to clean up spills promptly. Different natural stone surfaces require specific sealing methods. For sandstone, terracotta, and limestone, it is recommended to seal them before they are laid and grouted. These materials are highly porous and can quickly absorb stained water from adhesives and grout. Terracotta, in particular, should be sealed on all sides before installation due to its high porosity. Limestone is also susceptible to staining, and caution should be exercised while handling it to avoid leaving finger marks that can later stain the surface. Granite, marble, slate, and travertine, on the other hand, are sealed on all edges and the top after they are laid and grouted. Thorough cleaning is essential prior to the sealing process for these types of floors.
• Q: Can sealing effectively prevent efflorescence?
• A: Efflorescence is a phenomenon where salts migrate to the surface of porous materials during water evaporation, resulting in a whitish coating and potential damage to the surface finish. To effectively prevent efflorescence, it is crucial to apply a high-quality water-resistant sealer from a reputable range. However, it is important to note that efflorescence can also be influenced by factors such as water penetration. Therefore, it is essential to address any underlying causes of water penetration, such as repairing leaks or damaged grout, to effectively prevent efflorescence. By combining proper sealing with resolving the water source, proactive measures can be taken to minimize the occurrence of efflorescence and maintain the integrity of the surface.

For More Questions

FAQs » Stone Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software