huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A:
Most stone surfaces are subject to deterioration and degradation of appearance through traffic, UV rays, moisture, rain, chemicals, and other impurities such as oil, gas, grease, acids and salt. This can easily result in common problems such as cracking, pitting, scaling, spalling, delamination, dusting, discolouration, efflorescence, salt damage, etc. Sealing stone offers excellent maintenance benefits when quality products are used such as Australia's Deepshield™ deep impregnating range of sealers.
Sealing your tiles & grout can help:- Prevent unsightly stains
- Prevent discolouration
- Keep your tiled floors looking better for longer
Q: Why should I seal stone tiles & grout? - Sealing Natural Stone
Other FAQs :
- Q: Can all types of stone be sealed?
- A: If your stone is natural stone (slate, marble, granite, travertine, sandstone etc.) then it will need to be sealed. Stone is naturally porous and will absorb spills and stain easily.
- Q: What is the ideal timing for sealing my stone, and how can I determine if my stone requires sealing at present?
- A: It is highly recommended to seal your stone or grout immediately after installation to minimize the risk of accidental staining or damage. As for determining if your stone requires sealing at present, you can observe the presence of patchy sealed areas on the floor or an increased susceptibility to staining on the tiles. These signs indicate that resealing may be necessary to maintain the protection and appearance of your stone surfaces.
- Q: What is the recommended waiting time before walking on sealed tiles or placing furniture back on them?
- A: The recommended waiting time before walking on sealed tiles and placing furniture back on them is typically around 4 hours. This allows the tiles to become touch dry, making it safe to walk on the surface and return most furniture items. However, it is important to avoid mopping the tiles or exposing them to moisture for at least 24 hours to prevent washing off the sealer. The sealer requires up to 24 hours to fully cure and provide optimal protection. It is also advisable to refrain from placing rugs on the floor for at least 24 hours, allowing the tiles to breathe until the sealer is completely cured. Following these guidelines ensures the best results and longevity of the sealer on your tiles.
- Q: How often should tiles be fully resealed?
- A: The recommended frequency for fully resealing tiles can vary depending on factors such as the type and quality of the sealer used and the expected lifespan of the sealer. It is advised to regularly assess the condition of the tiles and evaluate the effectiveness of the existing sealer. If there are visible signs of wear, staining, or diminished protection, it may be necessary to undertake a complete resealing process. The specific timing for resealing will depend on these factors, and it is important to consistently monitor the tile's condition and consult the manufacturer's guidelines or sealer recommendations to determine the appropriate intervals for full resealing.
- Q: Can i seal the grout alone if my stone cant be sealed?
- A: Yes you can and it is recommended to seal your grout lines especially if they are a light colour, this will save you the likely cost of having to regrout your tiles only a few years after installation.
For More QuestionsFAQs » Sealing Natural Stone
Client Range
huge range of tiles and surfaces in all locations including: