1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Sealing Natural Stone »
4. How_should_I_clean_my_sealed_stone_surface

Frequently Asked Questions

Q: How should I clean my sealed stone surface? - Sealing Natural Stone

• A: The best way to keep stone surfaces in good condition is to use a ph neutral cleaner followed by clean water for spills, otherwise a microfibre mop will get rid of dust.

Other FAQs :

• Q: Can sealing effectively prevent efflorescence?
• A: Efflorescence is a phenomenon where salts migrate to the surface of porous materials during water evaporation, resulting in a whitish coating and potential damage to the surface finish. To effectively prevent efflorescence, it is crucial to apply a high-quality water-resistant sealer from a reputable range. However, it is important to note that efflorescence can also be influenced by factors such as water penetration. Therefore, it is essential to address any underlying causes of water penetration, such as repairing leaks or damaged grout, to effectively prevent efflorescence. By combining proper sealing with resolving the water source, proactive measures can be taken to minimize the occurrence of efflorescence and maintain the integrity of the surface.
• Q: What is the purpose of using sealer and coating agents on stone?
• A: The idea of using sealers on stone surface is to prevent water from penetrating the porous structure of the stone, which eventually leads to stains, cracks, weathering, and deterioration. There are largely two types of chemical agents for stone cleaning.
• Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards?
• A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.
• Q: Can i seal the grout alone if my stone cant be sealed?
• A: Yes you can and it is recommended to seal your grout lines especially if they are a light colour, this will save you the likely cost of having to regrout your tiles only a few years after installation.
• Q: Can penetrating sealers be applied over existing topical sealers?
• A: No, it is not possible to apply penetrating sealers over existing topical sealers. This is because topical sealers create a barrier on the surface of the material, preventing effective absorption of the penetrating sealer. To achieve the desired results, it is necessary to remove any existing topical sealer before applying a penetrating sealer. By removing the topical sealer, you allow the penetrating sealer to penetrate the material and provide the intended protection and benefits. Removing the topical sealer ensures the maximum effectiveness of the penetrating sealer and optimizes the overall sealing process.

For More Questions

FAQs » Sealing Natural Stone

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software