1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Polishing Natural Stone »
4. Polishing Concrete Floors »
5. Is_polished_concrete_good_for_the_environment

Frequently Asked Questions

Q: Is polished concrete good for the environment? - Polishing Natural Stone | Polishing Concrete Floors

• A: Polished concrete is one of the most sustainable flooring options today. Polishing the structural slab of a building, instead of harvesting resources to cover it, prevents waste and is extremely long lasting.

Other FAQs :

• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
• Q: Is polishing concrete messy?
• A: Mechanical, dry-grind concrete polishing is a fairly clean process, grinding will create a slurry, and can get a bit messy, but with the dry-grind process, a vacuum system is used in conjunction with the grinder to contain 98% of the airborne particles. The remainder of the dust is then easily swept up and removed in plastic bags.
• Q: Can the floor be brought back up if it gets dull?
• A: Yes and the best thing about it is that it will never be as involved as the initial process. Normally it will only take a couple of steps to reach the end result required.
• Q: How long will my polished concrete floor last?
• A: Your new polished concrete floor, with the proper care, will last a lifetime. But like anything else, your surfaces will need a little attention from time to time to make sure they are holding up against the demands you place on it.

For More Questions

FAQs » Polishing Natural Stone » Polishing Concrete Floors

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software