huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: When laying a new slab, a wide range of coloured concretes and coloured aggregates are available for you to choose from.
Q: Is coloured concrete and/or coloured aggregates available? - Polishing Natural Stone | Polishing Concrete Floors
Other FAQs :
- Q: Is polishing concrete messy?
- A: Mechanical, dry-grind concrete polishing is a fairly clean process, grinding will create a slurry, and can get a bit messy, but with the dry-grind process, a vacuum system is used in conjunction with the grinder to contain 98% of the airborne particles. The remainder of the dust is then easily swept up and removed in plastic bags.
- Q: How do I measure the size of the concrete area?
- A: We recommend that you measure each concrete area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
- Q: Should I seal my polished concrete?
- A: Concrete surfaces are subject to deterioration and degradation of appearance through traffic, UV rays, moisture, rain, chemicals, and other impurities such as oil, gas, grease, acids and salt. This can easily result in common problems such as cracking, pitting, scaling, spalling, delamination, dusting, discolouration, efflorescence, salt damage, etc. Concrete sealing offers excellent maintenance benefits when quality products are used such as Australia's Deepshield™ deep impregnating sealers.
- Q: Does sealing concrete surfaces help prevent efflorescence?
- A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.
- Q: How dusty is the polishing process?
- A: The process is virtually dust free. There is no airborne dust due to the use of Hepa filter vacuum systems. There will be some residual dust left on the floor but it will be vacuumed up between steps by another filtered vacuum. A little dust is created when using hand held grinders, however this is removed between each grinding stage.
For More QuestionsFAQs » Polishing Natural Stone » Polishing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including:
Related Links
- Our Services
- Types of Tiles
- Types Of Stone Tiles
- Tile Cleaners
- Tile Sealers
- Tile Restoration
- Grout Cleaning
- Grout Cleaner
- Bathroom Tile Cleaning
- Bathroom Grout Cleaning
- Stone Tile Cleaning
- Quarry Cleaning
- Stone Sealing
- Sandstone Cleaning
- Sandstone Restoration
- Bluestone Cleaning
- Bluestone Sealing
- Bluestone Stripping & Sealing
- Bluestone Restoration
- Bluestone Grinding
- Bluestone Specialists
- Slate Cleaning & Sealing
- Slate Stripping & Sealing
- Outdoor Tile Cleaning
- Outdoor Tile Sealing
- Wood Waxing
- Commercial Tile Cleaning
- Stone Stain Removal
- Grout Colour Sealing
- Pressure Cleaning
- Natural Stone Restoration
- Tile & Grout Cleaners
- Anti Slip Coating
- Cleaning Efflorescence Off Floors
- How to Remove Solvent Sealer From Tile