huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Polished concrete flooring can be walked on during the grind and polish process. There is no 'cure' time since it is a mechanical process. If a sealer is used, 4 hours is typically required before foot traffic can be resumed.
Q: How soon can I use the floor after the polishing? - Polishing Natural Stone | Polishing Concrete Floors
Other FAQs :
- Q: What is the optimal timing for sealing concrete, and how can I determine if my concrete surfaces require sealing at the present moment?
- A: The optimal time to seal your concrete is right after installation to provide immediate protection against staining and damage. As for determining if your concrete surfaces require sealing, there are a couple of indicators to look out for. Firstly, if you notice patchy areas on the floor where the sealant has worn off or is uneven, it is a clear sign that resealing is needed. Additionally, if your concrete is becoming more susceptible to staining and is no longer repelling liquids as effectively as before, it is a good indication that it is time to apply a fresh coat of sealer. By addressing these signs promptly, you can ensure that your concrete remains adequately protected and maintains its optimal appearance.
- Q: How long will my polished concrete floor last?
- A: Your new polished concrete floor, with the proper care, will last a lifetime. But like anything else, your surfaces will need a little attention from time to time to make sure they are holding up against the demands you place on it.
- Q: How dusty is the polishing process?
- A: The process is virtually dust free. There is no airborne dust due to the use of Hepa filter vacuum systems. There will be some residual dust left on the floor but it will be vacuumed up between steps by another filtered vacuum. A little dust is created when using hand held grinders, however this is removed between each grinding stage.
- Q: Does sealing concrete surfaces help prevent efflorescence?
- A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.
- Q: How much does polished concrete cost?
- A: Polished concrete pricing is basically dependent upon how many levels of grinding will be required to get the floor to a suitably smooth surface.
For More QuestionsFAQs » Polishing Natural Stone » Polishing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including:
Related Links
- Our Services
- Types of Tiles
- Types Of Stone Tiles
- Tile Cleaners
- Tile Sealers
- Tile Restoration
- Grout Cleaning
- Grout Cleaner
- Bathroom Tile Cleaning
- Bathroom Grout Cleaning
- Stone Tile Cleaning
- Quarry Cleaning
- Stone Sealing
- Sandstone Cleaning
- Sandstone Restoration
- Bluestone Cleaning
- Bluestone Sealing
- Bluestone Stripping & Sealing
- Bluestone Restoration
- Bluestone Grinding
- Bluestone Specialists
- Slate Cleaning & Sealing
- Slate Stripping & Sealing
- Outdoor Tile Cleaning
- Outdoor Tile Sealing
- Wood Waxing
- Commercial Tile Cleaning
- Stone Stain Removal
- Grout Colour Sealing
- Pressure Cleaning
- Natural Stone Restoration
- Tile & Grout Cleaners
- Anti Slip Coating
- Cleaning Efflorescence Off Floors
- How to Remove Solvent Sealer From Tile