1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Outdoor Tile Sealing »
4. What_is_the_typical_process_for_measuring_the_size_of_the_area_in_floor_sealing_services?

Frequently Asked Questions

Other FAQs :

• Q: Can penetrating sealers be applied over existing topical sealers?
• A: No, it is not possible to apply penetrating sealers over existing topical sealers. This is because topical sealers create a barrier on the surface of the material, preventing effective absorption of the penetrating sealer. To achieve the desired results, it is necessary to remove any existing topical sealer before applying a penetrating sealer. By removing the topical sealer, you allow the penetrating sealer to penetrate the material and provide the intended protection and benefits. Removing the topical sealer ensures the maximum effectiveness of the penetrating sealer and optimizes the overall sealing process.
• Q: Can accumulated efflorescence be removed from surfaces?
• A: Yes, it is possible to remove accumulated efflorescence from surfaces. We have the expertise and tools required for this task. Our process involves using effective efflorescence removers and employing specialized cleaning techniques. It is important to note that efflorescence is often caused by underlying issues such as leaks behind stones, tiles, or damaged grout lines. While we can successfully eliminate the visible efflorescence, it is crucial to address and resolve the root cause to prevent its reappearance in the future. By addressing both the efflorescence buildup and the contributing factors, we can restore the surface to its desired condition.
• Q: How can I assess whether my stone surface has been adequately sealed?
• A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.
• Q: How long should one wait after sealing surfaces before walking on them and returning furniture?
• A: After the completion of the sealing process, surfaces are typically touch dry within approximately 4 hours. This means that you can walk on them and return most furniture items after this timeframe. However, it is important to note that you should avoid mopping or exposing the surfaces to moisture for at least 24 hours. During this curing period, the sealer requires time to fully bond and cure to achieve optimal effectiveness. Exposing the surfaces to water or excessive moisture before the sealer has fully cured can potentially wash off the sealer and compromise its protective properties. It is recommended to follow the specific instructions provided by the manufacturer or professional service provider regarding the recommended drying and curing times before resuming regular use and maintenance activities.
• Q: How many coats of sealer are typically applied to tiles?
• A: Typically, tiles receive 2 to 4 coats of sealer during the sealing process. However, the exact number of coats can vary depending on factors such as the desired finish and the specific characteristics of the tiles being sealed. Professionals consider these factors to determine the optimal number of sealer coats needed to achieve the desired outcome in terms of both appearance and protection for the tiles.

For More Questions

FAQs » Outdoor Tile Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software