huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How can I assess whether my stone surface has been adequately sealed?
- A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.
- Q: Does Tile Cleaning offer assistance with moving furniture when sealing the floor?
- A: Tile Cleaning provides assistance with moving furniture during the floor sealing process. Their team of dedicated technicians is available to help with the relocation of furniture items that can be reasonably managed by one person, such as those with wheels or lightweight furniture like tables and chairs. However, it is important to keep in mind that while Tile Cleaning takes precautions to protect your belongings, they cannot be held responsible for any damages that may occur during the furniture moving process. To ensure the safety of valuable or fragile items, it is recommended to either relocate them to a secure area or properly secure them before the technicians arrive. By taking these necessary precautions, you can help ensure the safety of your furniture and minimize the risk of potential damage while the floor sealing process is being carried out.
- Q: What does the term "strip and seal" refer to when discussing floors?
- A: When discussing floors, the term "strip and seal" refers to a procedure where the existing coating or sealer on the floor surface is removed, and a new sealant is applied. Over time, floors can become dull and lose their shine, diminishing their visual appeal. By undergoing the strip and seal process, it is possible to revitalize the floors and bring them back to their original condition. This method provides a cost-effective solution for rejuvenating worn-out surfaces, making it a preferable alternative to complete floor replacement.
- Q: Does sealing provide a guarantee that my surfaces will remain free from stains?
- A: While sealing surfaces can provide a level of protection and allow for more time to clean up spills before staining occurs, it does not guarantee that surfaces will remain completely free from stains. Sealing creates a barrier that slows down the absorption of spills, giving you more time to clean or wipe them before staining sets in. However, prompt and proper cleaning of spills and dirt is still necessary to prevent potential staining. The effectiveness of sealing in stain prevention also depends on the type of sealer used, the porosity of the surface, and the nature of the substance causing the stain.
- Q: How long does the sealer need to dry for it to fully cure?
- A: The drying time required for a sealer to fully cure can vary depending on the specific product being used. In general, most sealers have a relatively quick drying time, with the surface becoming touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers typically complete their curing process within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is crucial to carefully follow the instructions provided by the manufacturer regarding the recommended drying time. Doing so ensures that the sealer properly sets and provides the intended level of protection. Adhering to the specified drying time will help guarantee the longevity and effectiveness of the sealer on your tiles.
For More QuestionsFAQs » Outdoor Tile Sealing
Client Range
huge range of tiles and surfaces in all locations including: