1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Sealing »
4. Sealing Concrete Floors »
5. Is_it_safe_to_have_concrete_stripped_and_sealed

Frequently Asked Questions

Other FAQs :

• Q: What are the reasons for considering the stripping of concrete floors?
• A: Stripping concrete floors is essential if you desire the cleanest and most visually appealing results. By entrusting the task to professionals, they can effectively remove as much of the old sealer as possible. This initial step paves the way for a thorough cleaning process before applying a new sealer. The end result is a fresh and immaculate polished concrete floor that showcases its natural beauty to the fullest extent. With professional stripping, cleaning, and sealing, your concrete floors can achieve their optimal appearance and maintain their pristine condition.
• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: What are the recommended preparations I should undertake before the concrete sealing process?
• A: To prepare for the concrete sealing process, it is recommended to remove all furniture and items from the floor area. By ensuring that the floor is clear and free of any obstacles, it allows the Tile Cleaning team to access the entire surface easily and carry out the sealing process efficiently. Removing furniture and items beforehand also helps to protect them from any potential damage during the sealing process. By following this simple preparation step, you can help ensure a smooth and effective concrete sealing experience.
• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: Can Tile Cleaners remove efflorescence buildup from concrete surfaces?
• A: Certainly! Tile Cleaners has the expertise to remove efflorescence from concrete surfaces. Efflorescence, which is the buildup of salts, can be effectively treated using specialized cleaning techniques and efflorescence removers. It is crucial to address the underlying cause of efflorescence, which is often a leak behind the concrete or damaged grout lines. While efflorescence can be removed, it is essential to resolve the root cause to prevent its recurrence. By engaging professional services, you can have the efflorescence removed and ensure that steps are taken to rectify the underlying issue, helping to restore the appearance of your concrete surfaces.

For More Questions

FAQs » Tile and Grout Sealing » Sealing Concrete Floors

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software