huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What is acid etching and how can I protect my bluestone against it?
- A: Any acidic substance is harmful for your bluestone tiles, they can be etched(eaten/corroded) easily and sealing against acid attack is very difficult. The best way to protect your bluestone tiles from acid attack is to seal and clean spills immediately. The high porosity of stone based tiles makes sealing a must in order to provide protection against future acid attack and liquid spillage.
- Q: What can I do to keep my bluestone tiles looking new after sealing them?
- A: To keep your bluestone tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the bluestone surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended. Our best advice to protect your bluestone tiles is to seal them with one of our highest quality sealers. This is the best protection your bluestone tiles can receive against staining.
- Q: What is the best sealer to use for my bluestone pavers around my pool?
- A: The best sealer to use for bluestone pavers around the pool is our high quality Impregnating Penetrating Water Based Sealer that protects your stone to the core and eliminates the slipperiness factor other sealers can create with bluestone pavers.
- Q: What is the usual lifespan of the sealer before it requires reapplication?
- A: The lifespan of a sealer before reapplication is influenced by the type of sealer used. Topical sealers typically provide protection for approximately 3 years before requiring reapplication. In contrast, impregnating sealers are more durable and can last up to 15 years or even a lifetime when applied to vertical surfaces. However, areas with high foot traffic or frequent use may necessitate more frequent inspections and resealing to ensure ongoing protection. Conducting a water absorption test can help assess the porosity of the surface and aid in selecting a sealer with longer-lasting durability. It is advisable to refer to the guidelines provided by the manufacturer and consult professionals to determine the specific reapplication schedule suitable for your tiles and grout.
- Q: How long does it take for my bluestone tiles to dry?
- A: It takes 4 hours to be touch dry and normally 24 hours for the sealer to fully cure, which is when you can put everything back into place. Nothing hard such as furniture can be moved on to the tiles and grout for at least 24 hours.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Bluestone Tiles
Client Range
huge range of tiles and surfaces in all locations including: