huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What kind of sealer do you apply? And will it affect the texture of my bluestone tiles?
- A: All of our sealing products are water based, we do not apply solvent- based sealer except in certain cases where it is the only option. The sealer will not affect the texture of your bluestone tiles in any way; however, it will protect your bluestone from staining and maintain that lustrous, natural finish you are looking for.
- Q: What does the term "sealer" refer to?
- A: When we talk about a "sealer," we are referring to a liquid or carrier that contains a resin. This substance is applied to porous surfaces, whether they are natural stone or man-made materials. The primary function of a sealer is to provide protection against staining caused by water and/or oil-based materials. By applying the sealer, you can prevent these substances from penetrating and staining the surface. Additionally, a sealer can enhance the overall cleaning results by making it easier to clean and maintain the surfaces effectively.
- Q: What is acid etching and how can I protect my bluestone against it?
- A: Any acidic substance is harmful for your bluestone tiles, they can be etched(eaten/corroded) easily and sealing against acid attack is very difficult. The best way to protect your bluestone tiles from acid attack is to seal and clean spills immediately. The high porosity of stone based tiles makes sealing a must in order to provide protection against future acid attack and liquid spillage.
- Q: How do I know if my bluestone floors need sealing?
- A: Tile Cleaners® advise the simple "water test". The water test is well known in the stone industry and it will help you determine whether your bluestone floors require sealing. First you need to place a few drops of water on your stone and let it set for around 10 to 30 minutes then wipe it dry. If your stone did not darken, it means your bluestone is perfectly sealed and does not require sealing, but if it has darkened, it means that the water was able to penetrate your stone and sealing is required.
- Q: How long does it take for my bluestone tiles to dry?
- A: It takes 4 hours to be touch dry and normally 24 hours for the sealer to fully cure, which is when you can put everything back into place. Nothing hard such as furniture can be moved on to the tiles and grout for at least 24 hours.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Bluestone Tiles
Client Range
huge range of tiles and surfaces in all locations including: