huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Quarry tiles stripping and sealing is simply the process of stripping the coating off the quarry tile floor before resealing it. Quarry tile flooring can look dull and lifeless over time, making it look older and really bringing down the feel of the home. By stripping and resealing, you can bring back the beautiful, lustrous appearance of your quarry and eliminate the cost of laying new flooring.
Q: What is a quarry tiles strip and seal? - Tile and Grout Cleaning | Cleaning Quarry Tiles
Other FAQs :
- Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards?
- A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.
- Q: Will sealing my quarry tiles prevent efflorescence?
- A: Efflorescence is a problem that quarry tiles and most porous tiles can face. It's the tendency of the water in the tiles to bring salts from the material to the surface as it evaporates. The water evaporates leaving the salts on the surface resulting in a whitish coating and ruining its finish. The only way to avoid this problem is to seal your quarry tiles with one of our highest quality water resistant sealer's and to stop the source of the water that is penetrating the tiles, for example a water pipe leak or damaged grout.
- Q: How do I measure the size of the quarry tile area?
- A: We recommend that you measure each area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
- Q: What can I do to keep my quarry tiles looking new?
- A: To keep your quarry tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the quarry surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended.
- Q: Efflorescence has built up on my quarry tiles. Can you remove it?
- A: Yes we can. Efflorescence is a build up of salts and can be removed with efflorescence removers and other specialised cleaning techniques. Efflorescence is typically caused by a leakage behind the quarry tiles or through damaged grout lines. The efflorescence can be removed but it is important the cause of the efflorescence is resoled.
For More QuestionsFAQs » Tile and Grout Cleaning » Cleaning Quarry Tiles
Client Range
huge range of tiles and surfaces in all locations including: