1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Cleaning »
4. Cleaning Quarry Tiles »
5. How_often_should_I_seal_my_quarry_tile_floors

Frequently Asked Questions

Q: How often should I seal my quarry tile floors? - Tile and Grout Cleaning | Cleaning Quarry Tiles

• A: It depends on the type of sealer used and the amount of foot traffic the quarry tiles are being exposed to. Australia's Deepshield® range of deep impregnating water based sealer's, offer long term benefits with Deepshield Gold® lasting up to 15 years. Topical sealer's have a life expectancy of around 3 years. If you have a high amount of foot traffic or perhaps severe weather conditions(for outdoor tiles), you may experience a shorter lifetime. Sealing your quarry tiles can also depend on the tiles condition. Once they start showing patchy areas and are staining easily then you should have them resealed. Give us a call and we can assist you with all your enquiries.

Other FAQs :

• Q: Is it safe to have quarry tiles stripped and sealed?
• A: Yes, our tile cleaning services are safe! Tile Cleaners® generally use only the highest quality water based products alongside our state of the art cleaning machinery to provide the best cleaning solution without compromising your quarry tiles.
• Q: Why do I need to strip my quarry tile floors.
• A: If you want your quarry floors to be their cleanest and looking their very best you need to have a professional remove as much of the old sealer as possible. Once this is done the cleaning process will be carried out and the sealer applied. You will have the freshest and cleanest possible quarry tilevfloors once we are finished with the process.
• Q: What is a quarry tiles strip and seal?
• A: Quarry tiles stripping and sealing is simply the process of stripping the coating off the quarry tile floor before resealing it. Quarry tile flooring can look dull and lifeless over time, making it look older and really bringing down the feel of the home. By stripping and resealing, you can bring back the beautiful, lustrous appearance of your quarry and eliminate the cost of laying new flooring.
• Q: Will sealing my quarry tiles prevent efflorescence?
• A: Efflorescence is a problem that quarry tiles and most porous tiles can face. It's the tendency of the water in the tiles to bring salts from the material to the surface as it evaporates. The water evaporates leaving the salts on the surface resulting in a whitish coating and ruining its finish. The only way to avoid this problem is to seal your quarry tiles with one of our highest quality water resistant sealer's and to stop the source of the water that is penetrating the tiles, for example a water pipe leak or damaged grout.
• Q: How do I measure the size of the quarry tile area?
• A: We recommend that you measure each area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.

For More Questions

FAQs » Tile and Grout Cleaning » Cleaning Quarry Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software