1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Cleaning »
4. Cleaning Concrete Tiles »
5. Why_should_I_seal_my_concrete

Frequently Asked Questions

Other FAQs :

• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: What are the indicators that suggest it is time to clean, strip, and reseal polished concrete surfaces?
• A: You will know it's time to have your concrete floors stripped, cleaned and sealed once they begin to appear dull or "matte" even after you have given them an efficient regular clean. If you notice that your concrete surfaces are staining easily, it's a good indication that your previous sealer is wearing off and your concrete floors will need to be resealed immediately to prevent permanent staining.
• Q: Does sealing concrete surfaces help prevent efflorescence?
• A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.
• Q: What does the process of concrete strip and seal involve?
• A: Concrete strip and seal is a process that involves removing the existing coating or sealant from the concrete floor and then resealing it. Over time, concrete floors can become dull and lose their lustrous appearance, giving them an aged and unattractive look. By performing a strip and seal procedure, the old coating is stripped off, and a new sealant is applied, bringing back the beautiful and glossy appearance of the polished concrete. This process not only restores the aesthetic appeal of the floor but also eliminates the need for costly floor replacement. By opting for concrete strip and seal, you can revitalize your concrete floors and give them a fresh, new look without the expense of installing new flooring.
• Q: What is the pricing structure for the stripping and sealing services provided by Tile Cleaners® for concrete surfaces?
• A: Tile Cleaning applies a pricing structure based on the square meterage of each separate room when providing stripping and sealing services for concrete surfaces. You can find a detailed price list on the Tile Cleaning website, allowing you to review and assess the costs associated with the desired services. Prior to commencing the work, the team will conduct individual room measurements, confirm the scope of work, and provide a comprehensive cost breakdown to ensure transparency and clarity. By following this approach, Tile Cleaning aims to provide a clear understanding of the pricing structure and deliver accurate cost estimates to their valued customers.

For More Questions

FAQs » Tile and Grout Cleaning » Cleaning Concrete Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software