huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: Is it possible to apply penetrating concrete sealers over existing topical sealers?
- A: No, it is not possible to apply penetrating concrete sealers over existing topical sealers. Topical sealers create a membrane or film on the surface of the concrete, forming a barrier that prevents the penetrating sealers from effectively absorbing into the concrete. Therefore, before applying a penetrating sealer, it is necessary to remove any existing topical sealer to ensure proper penetration and adhesion of the new sealer. This preparation step ensures that the penetrating sealer can effectively provide the desired protection and enhance the durability of the concrete surface.
- Q: What is the estimated drying time for concrete sealer?
- A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
- Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage?
- A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.
- Q: Do the products used by Tile Cleaning contain any toxic ingredients?
- A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
- Q: What is the recommended method for cleaning polished concrete surfaces?
- A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
For More QuestionsFAQs » Tile and Grout Cleaning » Cleaning Concrete Tiles
Client Range
huge range of tiles and surfaces in all locations including: