1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile Stripping and Sealing »
4. Which_process_can_I_expect_when_you_arrive_to_reseal_my_floors

Frequently Asked Questions

Q: Which process can I expect when you arrive to reseal my floors? - Tile Stripping and Sealing

• A: Our professional team will go through the job processes with you step by step so you know exactly what you're getting. The process includes stripping any previous sealer if it was applied, the floor is then thoroughly cleaned and neutralised so that it is free of dust, residue and anything else that can affect the new sealer. A new sealer is applied to the dry floor and allowed to set. The newly sealed floor will not only look new again, it will be protected and result in your floors becoming easier to maintain.

Other FAQs :

• Q: Does Tile Cleaning offer assistance with moving furniture when sealing the floor?
• A: Tile Cleaning provides assistance with moving furniture during the floor sealing process. Their team of dedicated technicians is available to help with the relocation of furniture items that can be reasonably managed by one person, such as those with wheels or lightweight furniture like tables and chairs. However, it is important to keep in mind that while Tile Cleaning takes precautions to protect your belongings, they cannot be held responsible for any damages that may occur during the furniture moving process. To ensure the safety of valuable or fragile items, it is recommended to either relocate them to a secure area or properly secure them before the technicians arrive. By taking these necessary precautions, you can help ensure the safety of your furniture and minimize the risk of potential damage while the floor sealing process is being carried out.
• Q: How do I measure the size of the area hat requires stripping?
• A: We recommend that you measure each area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
• Q: What is a tile strip and seal?
• A: Tile stripping and sealing is simply the process of stripping the coating off the marble floor before resealing it. Surfaces can begin to appear dull and lifeless over time, making them look older and really bringing down the feel of any area. By stripping and resealing, you can bring back the beautiful, lustrous appearance of your surfaces and eliminate the cost of laying new flooring.
• Q: What can I do to keep my tiles looking new?
• A: To keep your tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the marble surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended.
• Q: How frequently should floors be sealed?
• A: The recommended frequency for sealing floors can vary depending on factors such as the type of sealer used and the amount of foot traffic on the tiles. Deep impregnating water-based sealers, like Deepshield™ Gold, are known to provide long-lasting protection for up to 15 years. However, topical sealers typically require reapplication every 3 years, although this can be influenced by factors such as heavy foot traffic or harsh weather conditions. Regular assessment of the floor's condition is important, looking for signs like patchy areas or increased susceptibility to staining, as these may indicate the need for resealing. For personalized guidance and more detailed information, it is recommended to consult professionals or providers such as Australia's Deepshield™ for assistance and inquiries.

For More Questions

FAQs » Tile Stripping and Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software