1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile Sealing »
4. How_do_I_know_when_my_surface_is_ready_for_cleaning,_stripping_and_resealing

Frequently Asked Questions

Other FAQs :

• Q: What is the purpose or rationale behind performing floor stripping?
• A: The purpose of floor stripping is to achieve the cleanest and most visually appealing results for your floors. When professionals perform this task, their objective is to meticulously remove the old sealer, ensuring a thorough process. This stripping sets the foundation for an effective cleaning procedure, followed by the application of a fresh sealer. By following this meticulous approach, the surfaces are revitalized, resulting in a pristine and immaculate appearance. Ultimately, the floor stripping process aims to deliver the freshest and cleanest outcome for your floors.
• Q: Can sealing effectively prevent efflorescence?
• A: Efflorescence is a phenomenon where salts migrate to the surface of porous materials during water evaporation, resulting in a whitish coating and potential damage to the surface finish. To effectively prevent efflorescence, it is crucial to apply a high-quality water-resistant sealer from a reputable range. However, it is important to note that efflorescence can also be influenced by factors such as water penetration. Therefore, it is essential to address any underlying causes of water penetration, such as repairing leaks or damaged grout, to effectively prevent efflorescence. By combining proper sealing with resolving the water source, proactive measures can be taken to minimize the occurrence of efflorescence and maintain the integrity of the surface.
• Q: What is the usual lifespan of the sealer before it requires reapplication?
• A: The lifespan of a sealer before reapplication is influenced by the type of sealer used. Topical sealers typically provide protection for approximately 3 years before requiring reapplication. In contrast, impregnating sealers are more durable and can last up to 15 years or even a lifetime when applied to vertical surfaces. However, areas with high foot traffic or frequent use may necessitate more frequent inspections and resealing to ensure ongoing protection. Conducting a water absorption test can help assess the porosity of the surface and aid in selecting a sealer with longer-lasting durability. It is advisable to refer to the guidelines provided by the manufacturer and consult professionals to determine the specific reapplication schedule suitable for your tiles and grout.
• Q: Is it possible to seal only the grout if the tiles cannot be sealed?
• A: Sealing the grout lines alone is indeed possible and highly recommended, especially if the grout is a light color. By sealing the grout, you can prevent stains and discoloration, ultimately extending its lifespan. This proactive measure can potentially save you the expense and effort of having to regrout the tiles within just a few years of installation.
• Q: What is the recommended method for cleaning a surface that has been sealed?
• A: To maintain a sealed surface effectively, it is recommended to use a pH neutral cleaner. This type of cleaner effectively removes dirt and grime without causing damage to the sealant. In case of spills, it is crucial to clean them promptly using clean water to prevent potential staining or residue. For regular maintenance and dust removal, using a microfiber mop is highly advised. The fine fibers of a microfiber mop efficiently capture dust particles, ensuring a clean and dust-free surface. By following these practices, you can help preserve the quality and appearance of your sealed surfaces.

For More Questions

FAQs » Tile Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software