1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile Cleaners »
4. Does_sealing_make_my_stone_or_stone_maintenance_free

Frequently Asked Questions

Other FAQs :

• Q: How will the charges for cleaning my stone tiles be determined?
• A: Our pricing for cleaning stone tiles is based on a per square meter rate for each individual room. To provide transparency, we have a detailed price list available on our website for you to review. To ensure a smooth and efficient process, we kindly request that you measure each room individually before our arrival. This helps facilitate a fast and straightforward billing process at the end of the service, benefiting both parties involved.
• Q: What type of guarantee is offered with tile sealing services?
• A: Tile sealing services typically do not come with guarantees. The lifespan of our Impregnating Water Based Sealers is approximately up to 10 years, depending on various factors such as the quality of the stone, traffic levels, and maintenance practices. It is essential to note that sealing does not create an impenetrable barrier, but rather provides a timeframe to address spills. While an unsealed floor can stain immediately, a sealed floor is resistant to staining and allows for a reaction time of 4-5 hours. A penetrating sealer is applied just below the surface of the stone, preventing spills from penetrating and staining the stone. However, it is unable to prevent acid-based spills (like red wine, vinegar, urine, fruit juice, etc.) from causing etching or burning on the stone surface, leading to a dull or frosty appearance. It is crucial to promptly clean up spills of this nature to prevent permanent damage to the stone surface.
• Q: What are the reasons for cleaning your stone surface?
• A: Cleaning your stone surface is essential because natural stone products tend to harbor dirt, residues, dust, and grime within their pores. It is crucial to thoroughly clean these pores before applying any sealant to the surface. If dirt and other contaminants are trapped beneath the stone sealer, they can eventually lead to the formation of a milky white residue between the top of the stone and the underside of the sealer. To rectify this issue, it becomes necessary to remove the stone sealer and perform a thorough cleaning process.
• Q: How can I assess whether my stone surface has been adequately sealed?
• A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.
• Q: What is the recommended frequency for re-sealing a stone surface?
• A: The recommended frequency for re-sealing a stone surface is typically every 5 to 10 years, depending on the quality and type of sealer used. Some premium sealers can last even longer, up to 15 years or even a lifetime. Special stone seal removers are available for resealing natural stone floors. With proper care and maintenance, a natural stone floor can maintain its natural finish for a lifetime. It is crucial to use the appropriate products specifically designed for your type of natural stone floor to ensure its longevity and appearance. Additionally, it is important to seal other stone features such as stairs, tables, pillars, and fireplaces to protect them from staining and damage. Fireplaces, in particular, can be susceptible to staining from carbon deposits and UV damage, making sealing essential for their preservation.

For More Questions

FAQs » Tile Cleaners

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software