1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Sealing »
4. Stone Sealing »
5. What_can_I_do_to_keep_my_surfaces_looking_new

Frequently Asked Questions

Other FAQs :

• Q: What are the benefits of hiring a professional to seal my stone?
• A: Hiring a professional to seal your stone brings several advantages. Firstly, professionals have the expertise to select the appropriate sealer based on the type of stone and its specific needs. They ensure that the stone is thoroughly cleaned before sealing, removing any dirt or blemishes that could be trapped beneath the sealer. This ensures a clean and flawless surface for optimal sealing results. Professionals are knowledgeable about industry standards and best practices, ensuring that the sealing process is done correctly and effectively. By relying on a professional, you can have peace of mind knowing that your stone will be sealed properly, enhancing its appearance and providing long-lasting protection.
• Q: The stone supplier said to seal my porcelain but my tiler said not to - why?
• A: The truth is porcelain is creating much confusion in the market place and many pages have been written to try to put all issues into perspective. The more questions you ask the more confused you will be. As a rule of thumb, textured and honed porcelain doesn't need to be sealed, but polished porcelain often does need to be. This is contrary to what may seem logical. The tiny pores that accept staining are created in the polishing process. A good penetrating sealer fills these pores and sets up good stain protection. The textured stone generally just need a good clean because of the rough surface. If you are not sure, do a stain test. Get a sample stone or an off-cut and try to stain it with the things common to that area. If it stains, there is a benefit to having the stone sealed.
• Q: How can I assess whether my stone surface has been adequately sealed?
• A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.
• Q: What can I expect in terms of the appearance of my floors after the cleaning and sealing process?
• A: If your grout (and stone, if applicable) have not been sealed previously, it is possible that certain stains, especially in high traffic areas, may be permanent. However, if your grout (and stone, if applicable) have been sealed previously, the cleaning process should have prevented the penetration of dirt and other contaminants. As a result, you can expect excellent results from the cleaning, leaving your floors looking refreshed and rejuvenated.
• Q: Which type of sealer is recommended for stone surfaces?
• A: The appropriate type of sealer for your stone surfaces depends on the specific type of stone you have and its intended use. Different types of stones have varying porosity levels and characteristics, which may require different types of sealers to achieve optimal results. It is recommended to consult with a professional or refer to the manufacturer's guidelines to determine the most suitable sealer for your specific stone and intended application.

For More Questions

FAQs » Stone Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software