1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Sealing »
4. Stone Sealing »
5. My_polished_marble__limestone__travertine_is_sealed_but_still_has_marks_ _why

Frequently Asked Questions

Other FAQs :

• Q: What are the benefits of hiring a professional to seal my stone?
• A: Hiring a professional to seal your stone brings several advantages. Firstly, professionals have the expertise to select the appropriate sealer based on the type of stone and its specific needs. They ensure that the stone is thoroughly cleaned before sealing, removing any dirt or blemishes that could be trapped beneath the sealer. This ensures a clean and flawless surface for optimal sealing results. Professionals are knowledgeable about industry standards and best practices, ensuring that the sealing process is done correctly and effectively. By relying on a professional, you can have peace of mind knowing that your stone will be sealed properly, enhancing its appearance and providing long-lasting protection.
• Q: Can sealing effectively prevent efflorescence?
• A: Efflorescence is a phenomenon where salts migrate to the surface of porous materials during water evaporation, resulting in a whitish coating and potential damage to the surface finish. To effectively prevent efflorescence, it is crucial to apply a high-quality water-resistant sealer from a reputable range. However, it is important to note that efflorescence can also be influenced by factors such as water penetration. Therefore, it is essential to address any underlying causes of water penetration, such as repairing leaks or damaged grout, to effectively prevent efflorescence. By combining proper sealing with resolving the water source, proactive measures can be taken to minimize the occurrence of efflorescence and maintain the integrity of the surface.
• Q: How many coats of sealer are typically applied to stone surfaces?
• A: The number of coats applied to your stone surfaces usually ranges from 2 to 4, depending on several factors, including the desired finish.
• Q: Why do I still see marks on my polished marble/limestone/travertine even though it has been sealed?
• A: Even though your polished marble/limestone/travertine has been sealed, you may still notice marks on the surface. It's important to understand that these marks are often not stains but rather etches. Acid-sensitive stones, such as these, can be affected by any acid, which can lead to a loss of polish and the creation of a dull or frosty surface. For example, red wine can cause both a stain and an etch on unsealed stone, but on a sealed stone, only the etch may be visible. Penetrating sealers function by sitting below the surface of the stone, preventing acid from deeply penetrating and causing stubborn stains, but they may not fully protect against surface etching. Acid can come in various forms, such as fruit juices, wine, salad dressings, or even urine in bathroom settings, and can cause damage. The good news is that this type of damage can typically be repaired.
• Q: What can I expect in terms of the appearance of my floors after the cleaning and sealing process?
• A: If your grout (and stone, if applicable) have not been sealed previously, it is possible that certain stains, especially in high traffic areas, may be permanent. However, if your grout (and stone, if applicable) have been sealed previously, the cleaning process should have prevented the penetration of dirt and other contaminants. As a result, you can expect excellent results from the cleaning, leaving your floors looking refreshed and rejuvenated.

For More Questions

FAQs » Stone Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software