1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Sealing Natural Stone »
4. What_is_a_strip_and_seal

Frequently Asked Questions

Other FAQs :

• Q: What does the term "strip and seal" refer to when discussing floors?
• A: When discussing floors, the term "strip and seal" refers to a procedure where the existing coating or sealer on the floor surface is removed, and a new sealant is applied. Over time, floors can become dull and lose their shine, diminishing their visual appeal. By undergoing the strip and seal process, it is possible to revitalize the floors and bring them back to their original condition. This method provides a cost-effective solution for rejuvenating worn-out surfaces, making it a preferable alternative to complete floor replacement.
• Q: Why do I need to strip my stone surfaces?
• A: If you want your stone to be its cleanest and looking its very best you need to have a professional remove as much of the old sealer as possible. Once this is done the cleaning process will be carried out and the new sealer applied. You will have the freshest and cleanest possible stone surfaces once we are finished with the process.
• Q: How long does the sealer need to dry for it to fully cure?
• A: The drying time required for a sealer to fully cure can vary depending on the specific product being used. In general, most sealers have a relatively quick drying time, with the surface becoming touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers typically complete their curing process within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is crucial to carefully follow the instructions provided by the manufacturer regarding the recommended drying time. Doing so ensures that the sealer properly sets and provides the intended level of protection. Adhering to the specified drying time will help guarantee the longevity and effectiveness of the sealer on your tiles.
• Q: How do I know when my stone surface is ready for cleaning, stripping and resealing?
• A: You will know it's time to have your stone stripped, cleaned and sealed once it begins to appear dull or "matte" even after you have given it an efficient regular clean. If you notice that your surfaces are staining easily, it's a good indication that your previous sealer is wearing off and your stone will need to be resealed immediately to prevent permanent staining.
• Q: What is the purpose of using sealer and coating agents on stone?
• A: The idea of using sealers on stone surface is to prevent water from penetrating the porous structure of the stone, which eventually leads to stains, cracks, weathering, and deterioration. There are largely two types of chemical agents for stone cleaning.

For More Questions

FAQs » Sealing Natural Stone

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software