1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Limestone »
4. Tile and Grout Sealing »
5. Will_the_sealer_make_my_limestone_floors_slippery

Frequently Asked Questions

Other FAQs :

• Q: How can I maintain the fresh and new appearance of my limestone tiles after they have been sealed?
• A: In order to preserve the pristine condition of your limestone tiles after they have been sealed, Tile Cleaners® suggests following a regular cleaning routine. It is recommended to clean the tiles and grout on a weekly basis using a mild detergent that effectively removes dirt and grime without compromising the integrity of the sealer. It is crucial to avoid using strong detergents with acidic or alkaline properties as they may impact the sealer. Instead, opt for mild detergents and pH neutral substances for optimal results. Additionally, the best way to safeguard your limestone tiles against staining is to apply one of our highest quality sealers, which provides superior protection.
• Q: What is the drying time for my limestone tiles?
• A: The drying process for your limestone tiles involves two stages. The first stage is when the tiles become touch dry, which typically takes approximately 4 hours. However, for the sealer to fully cure and reach its optimal effectiveness, it generally requires a period of 24 hours. Once the sealer has fully cured, you can safely place everything back in its original position. It is important to note that during this 24-hour period, it is advisable to avoid placing any heavy objects, such as furniture, directly on the tiles and grout to prevent potential damage.
• Q: How can I determine if my limestone floors require sealing?
• A: Tile Cleaners® recommends performing a straightforward "water test" to assess the need for sealing your limestone floors. This test, widely recognized in the stone industry, can help you determine whether your floors require sealing. To conduct the test, place a few drops of water on the limestone surface and allow them to remain for approximately 10 to 30 minutes. Afterward, wipe the water dry. If the stone did not darken during this process, it indicates that your limestone is adequately sealed and does not require further sealing. However, if the water caused the stone to darken, it suggests that the water was able to penetrate the stone, indicating the need for sealing to protect the limestone properly.
• Q: What type of sealer is applied by Tile Cleaners®? Will it have any impact on the texture of limestone tiles?
• A: Tile Cleaners® exclusively uses water-based sealing products for their services. In most cases, solvent-based sealers are not utilized, except when they are the only viable option. It is important to note that the sealer employed by Tile Cleaners® does not alter the texture of limestone tiles in any manner. Rest assured, the sealer's primary function is to provide protection against staining while preserving the desired lustrous and natural appearance of your limestone tiles.
• Q: Which sealer is considered the most suitable for sealing limestone pavers around swimming pools?
• A: When it comes to sealing limestone pavers around swimming pools, our top recommendation is our high-quality Impregnating Penetrating Water Based Sealer. This specific sealer is designed to provide comprehensive protection to the limestone pavers, penetrating deep into the stone to ensure effective and long-lasting results. One notable advantage of this sealer is its ability to eliminate the slipperiness that can be associated with other sealers used on limestone pavers. By opting for our Impregnating Penetrating Water Based Sealer, you can confidently protect your limestone pavers around the pool area while ensuring enhanced safety and durability.

For More Questions

FAQs » Limestone » Tile and Grout Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software