1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Limestone »
4. Tile and Grout Sealing »
5. What_kind_of_sealer_do_you_apply?_And_will_it_affect_the_texture_of_my_limestone_tiles

Frequently Asked Questions

Other FAQs :

• Q: How can I determine if my limestone floors require sealing?
• A: Tile Cleaners® recommends performing a straightforward "water test" to assess the need for sealing your limestone floors. This test, widely recognized in the stone industry, can help you determine whether your floors require sealing. To conduct the test, place a few drops of water on the limestone surface and allow them to remain for approximately 10 to 30 minutes. Afterward, wipe the water dry. If the stone did not darken during this process, it indicates that your limestone is adequately sealed and does not require further sealing. However, if the water caused the stone to darken, it suggests that the water was able to penetrate the stone, indicating the need for sealing to protect the limestone properly.
• Q: What type of sealer is applied by Tile Cleaners®? Will it have any impact on the texture of limestone tiles?
• A: Tile Cleaners® exclusively uses water-based sealing products for their services. In most cases, solvent-based sealers are not utilized, except when they are the only viable option. It is important to note that the sealer employed by Tile Cleaners® does not alter the texture of limestone tiles in any manner. Rest assured, the sealer's primary function is to provide protection against staining while preserving the desired lustrous and natural appearance of your limestone tiles.
• Q: What is the recommended method for measuring the area of limestone that requires sealing?
• A: For accurate measurement of the area that needs sealing, we advise measuring each individual limestone area separately. The most straightforward method is to multiply the width by the length of each area. As an illustration, if a room measures 3 meters in length and 2 meters in width, the total area would be calculated as 3 X 2 = 6m2. This approach ensures precise measurements and allows for an accurate estimation of the sealing requirements for your limestone surfaces.
• Q: Do you offer color enhancing services for travertine? If yes, could you provide an explanation of the process involved in color enhancement?
• A: Absolutely, we provide color enhancing services specifically designed for travertine. The color enhancement process involves the application of a specialized compound that enriches and intensifies the natural appearance of the travertine. By applying the color enhancer, the tiles' tones and hues are deepened, bringing out the inherent beauty of the travertine material. This treatment imparts a subtle wet or low sheen finish, enhancing the overall visual appeal of your travertine surfaces. Our color enhancing services are aimed at highlighting the unique characteristics and enhancing the aesthetics of your travertine.
• Q: How can I maintain the fresh and new appearance of my limestone tiles after they have been sealed?
• A: In order to preserve the pristine condition of your limestone tiles after they have been sealed, Tile Cleaners® suggests following a regular cleaning routine. It is recommended to clean the tiles and grout on a weekly basis using a mild detergent that effectively removes dirt and grime without compromising the integrity of the sealer. It is crucial to avoid using strong detergents with acidic or alkaline properties as they may impact the sealer. Instead, opt for mild detergents and pH neutral substances for optimal results. Additionally, the best way to safeguard your limestone tiles against staining is to apply one of our highest quality sealers, which provides superior protection.

For More Questions

FAQs » Limestone » Tile and Grout Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software