huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: We recommend that you measure each room separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
Q: How do I measure the size of the area to be honed? - Honing Natural Stone | Honing Travertine Tiles
Other FAQs :
- Q: Can honing damage my travertine?
- A: Tile Cleaners® technicians use the highest quality machinery providing the best solutions without compromising your surfaces. Tile Cleaners® prides itself on specifically catering for each tile variety and each situation with the highest degree of care. Stone based tiles are usually more porous requiring more attention than man made tiles, which is why its extremely important to use correct products and equipment to restore your tiles to their best possible condition.
- Q: Will honing remove the sealer from my travertine?
- A: Yes, the mechanical resurfacing process used to hone your floors will remove all coatings, resulting in your floors being in an "as new" condition. Once honed, you should reseal your surfaces with a deep penetrating, impregnating sealer, which avoids staining and will reduce the effect of soiling.
- Q: Are your products toxic?
- A: Here at Tile Cleaners® we understand the importance of your family's safety, which is why Tile Cleaners® prefer to use non-toxic finishing agents as we not only want to protect your floors, but your families health too. Materials and agents that present potential health hazards are not in our product portfolio and never have been.
- Q: What is the difference between your honing service and polishing service?
- A: Honing and polishing produce fairly opposite results. Polishing produces a glossy finish while honing produces a more matte finish. Honed surfaces can hide some imperfections such as scratches, and some everyday dirt, whereas polishing will reflect light and imperfections more than a honed surface.
- Q: Can honing remove lippage from tiling?
- A: Lippage is the term given to uneven tiles that are set higher than one another, which usually requires a more aggressive process than honing in order to create a completely flat surface. Grinding is recommended for excessive lippage.
For More QuestionsFAQs » Honing Natural Stone » Honing Travertine Tiles
Client Range
huge range of tiles and surfaces in all locations including: