huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How frequently should floors be sealed?
- A: The recommended frequency for sealing floors can vary depending on factors such as the type of sealer used and the amount of foot traffic on the tiles. Deep impregnating water-based sealers, like Deepshield™ Gold, are known to provide long-lasting protection for up to 15 years. However, topical sealers typically require reapplication every 3 years, although this can be influenced by factors such as heavy foot traffic or harsh weather conditions. Regular assessment of the floor's condition is important, looking for signs like patchy areas or increased susceptibility to staining, as these may indicate the need for resealing. For personalized guidance and more detailed information, it is recommended to consult professionals or providers such as Australia's Deepshield™ for assistance and inquiries.
- Q: What is the purpose or rationale behind performing floor stripping?
- A: The purpose of floor stripping is to achieve the cleanest and most visually appealing results for your floors. When professionals perform this task, their objective is to meticulously remove the old sealer, ensuring a thorough process. This stripping sets the foundation for an effective cleaning procedure, followed by the application of a fresh sealer. By following this meticulous approach, the surfaces are revitalized, resulting in a pristine and immaculate appearance. Ultimately, the floor stripping process aims to deliver the freshest and cleanest outcome for your floors.
- Q: Can penetrating sealers be applied over existing topical sealers?
- A: No, it is not possible to apply penetrating sealers over existing topical sealers. This is because topical sealers create a barrier on the surface of the material, preventing effective absorption of the penetrating sealer. To achieve the desired results, it is necessary to remove any existing topical sealer before applying a penetrating sealer. By removing the topical sealer, you allow the penetrating sealer to penetrate the material and provide the intended protection and benefits. Removing the topical sealer ensures the maximum effectiveness of the penetrating sealer and optimizes the overall sealing process.
- Q: How can I determine the right time to seal my tiles, and what are the signs that indicate my tiles are in need of sealing?
- A: To determine the appropriate timing for sealing tiles, it is beneficial to adopt a proactive approach and seal them immediately after installation to prevent potential staining or damage. However, if you are considering sealing existing tiles, there are indicators to look out for. Keep an eye out for patchy areas on the floor where the sealer has worn off, or observe if the tiles are becoming more vulnerable to staining. These signs suggest that resealing is necessary to preserve the appearance of the tiles and provide effective surface protection.
- Q: Does sealing completely eliminate the necessity for regular maintenance of tiles or stone?
- A: While sealing offers significant benefits such as easier maintenance and increased resistance to staining for tiles or stone surfaces, it is important to acknowledge that regular maintenance is still necessary. Sealing creates a protective barrier that allows contaminants to remain on the surface for a longer period, providing more time for cleaning before potential staining occurs. However, sealing does not make porous surfaces completely impervious to staining. While it significantly reduces the immediate risk of staining, it does not eliminate the need for regular cleaning. Utilizing appropriate stone cleaning products and maintaining a consistent cleaning routine are essential for preserving the condition and appearance of sealed tiles or stone surfaces. Regular maintenance remains crucial for ensuring the longevity and optimal condition of the surfaces, even after they have been sealed.
For More QuestionsFAQs » Ceramic » Tile and Grout Sealing
Client Range
huge range of tiles and surfaces in all locations including: