1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Bluestone Tile Specialists »
4. How_often_should_I_seal_my_bluestone_floors

Frequently Asked Questions

Q: How often should I seal my bluestone floors? - Bluestone Tile Specialists

• A: It depends on the type of sealer used and the amount of foot traffic the bluestone tiles are being exposed to. Australia's Deepshield® range of deep impregnating water based sealer's, offer long term benefits with Deepshield Gold® lasting up to 15 years. Topical sealer's have a life expectancy of around 3 years. If you have a high amount of foot traffic or perhaps severe weather conditions(for outdoor tiles), you may experience a shorter lifetime. Sealing your bluestone tiles can also depend on the tiles condition. Once they start showing patchy areas and are staining easily then you should have them resealed. Give us a call and we can assist you with all your enquiries.

Other FAQs :

• Q: Will sealing my bluestone prevent efflorescence?
• A: Efflorescence is a problem that bluestone and most porous tiles can face. It's the tendency of the water in the bluestone to bring salts from the stone to the surface as it evaporates. The water evaporates leaving the salts on the surface resulting in a whitish coating and ruining its finish. The only way to avoid this problem is to seal your bluestone tiles with one of our highest quality water resistant sealer's and to stop the source of the water that is penetrating the tiles, for example a water pipe leak or damaged grout.
• Q: What can I do to keep my bluestone tiles looking new?
• A: To keep your bluestone tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the bluestone surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended.
• Q: What should I do to prepare for the bluestone cleaning?
• A: Move all furniture and items off the floor so it is ready for when we arrive.
• Q: How do I measure the size of the bluestone area?
• A: We recommend that you measure each bluestone area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
• Q: Does Tile Cleaning offer assistance with moving furniture when sealing the floor?
• A: Tile Cleaning provides assistance with moving furniture during the floor sealing process. Their team of dedicated technicians is available to help with the relocation of furniture items that can be reasonably managed by one person, such as those with wheels or lightweight furniture like tables and chairs. However, it is important to keep in mind that while Tile Cleaning takes precautions to protect your belongings, they cannot be held responsible for any damages that may occur during the furniture moving process. To ensure the safety of valuable or fragile items, it is recommended to either relocate them to a secure area or properly secure them before the technicians arrive. By taking these necessary precautions, you can help ensure the safety of your furniture and minimize the risk of potential damage while the floor sealing process is being carried out.

For More Questions

FAQs » Bluestone Tile Specialists

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software